Feature #2762
closed
informations on linco board are missing
100%
Description
There is two kind of linco board :
- V1 for 1 carrier (need two in the narval node)
- V2 for 2 carriers (need only one in the narval node)
In GEC monitoring we want to check status of the lincos board but we need to know how many linco are in each narval node (1 or 2).
And this information is not in the TM. (maybe it is in ADDB...)
To be discuss..
Updated by Grave Xavier about 12 years ago
- Status changed from New to Assigned
- Assigned To set to Grave Xavier
Still needed ?
Updated by Dosme Nicolas about 12 years ago
For the moment in GEC we launch the command : "check_hw 2" for each crystal to test if the two linco boards are available on the computing node. It works only for Linco V1... for Linco V2 the command will be "check_hw 1" to test if the linko board is available...
We need it... or we have to remove the test in the GEC.
Updated by Grave Xavier about 12 years ago
- Status changed from Assigned to Feedback
- Assigned To changed from Grave Xavier to Dosme Nicolas
where do I put this v1/v2 information in the narval device ?
Updated by Grave Xavier about 12 years ago
- Due date set to 05/16/2013
- Status changed from Feedback to Closed
- Assigned To changed from Dosme Nicolas to Grave Xavier
- % Done changed from 0 to 100
information added as pci_card attribute in narval_node table
closes in 187:6eb6ba505058